USM Haller, modular components

USM Haller pull-out shelf with colour bracket, including fixing set. With colour bracket, so that the new generation of fronts can be attached to it. Various colours, width 750, depth 350 or 500. Only the new (as-new) pull-out shelves have a return spring and a damper. Second-hand units do not include a return spring or a damper. You will receive only the pull-out shelf including the mounting kit, without a front panel. Condition: As new or second-hand

USM Haller slanted shelf, new generation, for 750mm module width (standard). This slanted shelf, or leaflet holder, can be folded up and remains in the raised position (new generation). Complete set, comprising shelf, fixings, etc.Supplied in separate parts and requires self-assembly. Condition Upcycled:As good as new. The slanted shelf has been stripped and freshly powder-coated. Available in pure white only. Second-hand:The second-hand slanted shelves are in a condition of +/- 8/10.So they’re in relatively good condition, with few signs of wear.Items with more signs of wear are recoated (upcycled).    

As-new USM Haller metal intermediate shelf, 500x350, in white. Complete set, including fixing materials. Condition: As new Width 500, Depth 350

Second-hand glass shelf, for USM Haller, 750x350, without USM Haller mounting set. Please note: this item consists of the glass only, without the mounting hardware. You can find the matching fixing set here: Fixing set for glass shelves Condition: As new

USM Haller mounting set for coat rack / clothes rail. (Tubes not included, brackets only) With the help of this mounting set, USM tubes can be fitted as coat rails within USM furniture. The tube is not included in this set and must be purchased separately. Otherwise, everything required for a rail is included. For 75-wide elements, you’ll need 75-series tubes; for 50-wide elements, 50-series tubes, and so on. Condition: As new

As-new USM Haller metal intermediate shelf, 750x350, in USM colours.

USM Haller assembly kit for glass shelves, in as-new condition.

USM Haller assembly kit with brackets for metal intermediate shelves.

Second-hand spare parts for USM drawer runners, older generation. Even though USM builds furniture to last a lifetime, everything does eventually break.Such as the plastic rollers on the drawer mounting system.These become brittle with age and eventually disintegrate.So if your drawer is jolting and no longer runs smoothly, this could be the reason. The drawer runner (the white bracket) runs at the front on two ball-bearing plastic rollers, which are connected to one another by a cross-bar (support box).The drawer slide itself also has two rollers (ball-bearing supports), which can break. We offer this spare part for experienced fitters. These second-hand spare parts are somewhat older but still in good condition.However, we cannot, of course, guarantee how long these castors will last. Assembly When replacing the support box, please ensure that it is fitted the right way round.The left and right sides are not the same length.We have included a sketch with the images to illustrate this. If the drawer is no longer centred at the end, but is too far to the left or too far to the right, the runner has been fitted incorrectly. We always sell the ball-bearing supports in pairs: 1x left-hand side and 1x right-hand side, including screws and plates.The plates have two cams; these must be centred.(If two drawers are fitted side by side, they must be offset to the left or right.)  

Second-hand and new magnetic bookends from USM. Reorganising books and documents made easy – with fully customisable bookends for effortless shelf organisation in your office. Condition: As new and second-hand