USM Haller, cladding
USM Haller metal element, Standard, 750x500. Usually used as the base and lid. Suitable for the standard dimension 750x500 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, the rear and the interior (shelves), we recommend metal components in ‘Used’ condition.
Glass element in as-new condition, compatible with the USM Haller, for various system dimensions. The lenses may show minimal signs of wear. The glass elements are supplied without glass holders.You can find matching glass holders in chrome here: USM 90° glass holder, chrome The 4 fabric stickers (to protect the edge) are always included. A 4 mm Allen key is used for assembly and disassembly. Condition: Second-hand or as good as new Availability for ‘As New’ items:Green light: In stock, delivery time 3–6 days.Yellow light: The item will be ordered from the manufacturer once the order has been placed.The delivery time depends on the manufacturer.
USM Haller metal element, as good as new, standard, 500x500. Usually used as a base, top, side or back panel. Compatible with the standard dimension 500x500 (distance from centre of ball to centre of ball).
USM Haller metal element, Standard, 750x350. Usually used as the base, lid and rear panel. Suitable for the standard dimensions 750x350 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, the rear and the interior (shelves), we recommend metal components in ‘Used’ condition.
USM Haller metal element, Standard, 750x250. Usually used as the base, lid and rear panel. Suitable for the standard dimension 750x250 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, the rear and the interior (shelves), we recommend metal components in ‘Used’ condition. Availability:Green traffic light: In stock, delivery time 3–6 days.Red light: Item not available. Cannot be ordered.Yellow light: The item will be ordered from the manufacturer once the order has been placed.The delivery time depends on the manufacturer.
Shortened USM Haller metal element, for pull-out doors, compatible with system dimensions 750x350. The metal element is approx. 2 cm shorter than the standard USM Haller metal elements. Used as a shelf when a pull-out door is fitted. Condition: As new (unused) Used: With very few signs of use, as these metal elements are not subjected to heavy loads.
USM Haller metal element, standard, 750x175. Usually used as the base, lid and rear panel. Suitable for the standard dimensions 750x175 (distance from centre of ball to centre of ball). As new = Unused This is not a standard item that we hold in stock.This item is ordered on request.Please note that delivery may take up to 40 working days.
USM Haller metal element, Standard, 500x350. These are generally used as the base, lid, outer walls and rear panel. Suitable for the standard dimension 500x350 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, the rear and the interior (shelves), we recommend metal components in ‘Used’ condition.
USM Haller metal element 500x395. Usually used as a base or lid for cabinet bodies and rolling containers. Suitable for the standard dimension 500x395 (distance from centre of ball to centre of ball). As new = Unused This is not a standard item that we hold in stock.This item is ordered on request.Please note that delivery may take up to 40 working days.
USM Haller metal element, standard, 500x250. These are generally used as the base, lid, outer walls and rear panel. Suitable for the standard dimension 500x250 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, the rear and the interior (shelves), we recommend metal components in ‘Used’ condition.
USM Haller metal element, standard, 500x250, perforated. Usually used as a partition. Suitable for the standard dimension 500x250 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, or compartments closed by doors, we recommend metal components in ‘Used’ condition.
USM Haller metal element, standard, 500x175. These are generally used as the base, lid, outer walls and rear panel. Suitable for the standard dimension 500x175 (distance from centre of ball to centre of ball). As new = Unused This is not a standard item that we hold in stock.This item is ordered on request.Please note that delivery may take up to 40 working days.
USM Haller metal element, Standard, 500x175, perforated. Usually used as a partition. Suitable for the standard dimension 500x175 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, or compartments closed by doors, we recommend metal components in ‘Used’ condition.
USM Haller metal element, standard, 350x250. These are generally used as the base, lid, outer walls and rear panel. Suitable for the standard dimensions 350x250 (distance from centre of ball to centre of ball). As new = Unused This is not a standard item that we hold in stock.This item is ordered on request.Please note that delivery may take up to 40 working days.
USM Haller metal element, standard, 350x250, perforated. Usually used as a partition. Suitable for the standard dimensions 350x250 (distance from centre of ball to centre of ball). As new = Unused This is not a standard item that we hold in stock.This item is ordered on request.Please note that delivery may take up to 40 working days.
USM Haller metal element, standard, 350x175. These are generally used as the base, lid, outer walls and rear panel. Suitable for the standard dimensions 350x175 (distance from centre of ball to centre of ball). As new = Unused This is not a standard item that we hold in stock.This item is ordered on request.Please note that delivery may take up to 40 working days.
USM Haller metal element, standard, 350x175, perforated. Usually used as a partition. Suitable for the standard dimensions 350x175 (distance from centre of ball to centre of ball). As new = Unused This is not a standard item that we hold in stock.This item is ordered on request.Please note that delivery may take up to 40 working days.
USM Haller metal element, standard, 250x175. Usually used as an outer wall, base, lid or back panel. Suitable for the standard size 250x175 (distance from centre of ball to centre of ball). As new = Unused This is not a standard item that we hold in stock.This item is ordered on request.Please note that delivery may take up to 40 working days.
USM Haller metal element, Standard, 500x350, perforated. Usually used as a partition. Suitable for the standard dimension 500x350 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, or compartments closed by doors, we recommend metal components in ‘Used’ condition.
USM Haller metal element, 350x350. These are generally used as the base, lid, outer walls and rear panel.Not suitable for use as a partition wall. Suitable for the standard dimension 350x350 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, the rear and the interior (shelves), we recommend metal components in ‘Used’ condition.
USM Haller metal element, 350x350, perforated. Usually used as a partition. Suitable for the standard dimension 350x350 (distance from centre of ball to centre of ball). Conditions: As new = Unused Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.) Our recommendation: For visible areas, we recommend metal components in ‘As New’ condition.For the lower sections, or compartments closed by doors, we recommend metal components in ‘Used’ condition.
USM Haller chrome-plated glass holder, to match the glass element. The price is per piece. Condition: As new
Second-hand USM Haller metal panels, system dimensions 500x350, perforated. Can be used as external or partition walls. The second-hand, perforated USM Haller metal elements are in very good condition and show almost no signs of wear. Compatible with the standard dimension 500x350 (distance from centre of ball to centre of ball). Condition: Second-hand