FlexTop – electric standing desks

New Levi corner sit/stand table, electrically height-adjustable, on castors. 200 x 154 cm corner table top, with 3 lifting columns.Includes cable duct. The built-in control panel can only move up and down.A Bluetooth control panel with a memory function would be available at an additional cost. Condition: Brand new, including a 5-year warranty

FlexTop ’s electrically height-adjustable desk. Very fast and sturdy. Table top 160x80 Fenix White Linak DeskFrame 1 base Lifting column, White DL6 Plus Speed: 80 mm/s Up/Down control panel DPF1K Cable tray, black Condition: New, 5-year warranty Available from stock

Brand-new 4-channel Linak control box / control unit. CBD6SH00040A-709 (Depending on the columns, it may be necessary to configure the software on the control box.)We offer this service at your premises for a service fee of 100.-.) Lightweight, flat control unit for Linak linear actuator systems.Plug-and-play compatible with all linear drives for tables and workstations.It has low power consumption in standby mode (< 0.1 W), is PVC-free and operates quietly.

Brand-new 2-channel Linak control box / control unit. Suitable for Linak high-speed lift columns and as a replacement for the high-power CBD4 and CBD5 control boxes. CBD6SP00020A-709 CBD6 (Depending on the columns, it may be necessary to configure the software on the control box.)We offer this service at your premises for a service fee of 100.-.) Lightweight, flat control unit for Linak linear actuator systems.Plug-and-play compatible with all linear drives for tables and workstations.It has low power consumption in standby mode (< 0.1 W), is PVC-free and operates quietly. Please note that the box states 400 watts. However, the output power is 300 watts. CBD6SP00020A-709 CBD6, 2-channel, configurable, cable routing, 0.1 W standby without 230 V mains cable, 300 W, SMPS commodity code: 85371091 Electronic Control Unit, programmable COO: DNK

Brand-new 2-channel Linak control box / control unit. CBD6SP00020A-009 CBD6 Lightweight, flat control unit for Linak linear actuator systems.Plug-and-play compatible with all linear drives for tables and workstations.It has low power consumption in standby mode (< 0.1 W), is PVC-free and operates quietly. Please note that the box states 300 watts. However, the output power is 200 watts.CBD6SP00020A-009 CBD6, 2-channel, configurable, cable routing, 0.1 W standby without 230 V mains cable,200W, SMPS commodity code: 85371091 Electronic Control Unit, programmable COO: DNK

New cable tray made of sheet steel, black powder-coated, suitable for the Levi sit-stand table. Dimensions: LxHxD: 1300x90x140 (The mounting area is 1300x220)

Brand-new "DPG1C" control panel. The DPG panels are operated via a tilt mechanism rather than buttons. Features:- Display- Bluetooth- Memory function, with 4 memory slots- Reminder function (LED light strip indicates when to stand up or sit down again) All control panels are supplied with a cable and RJ45 plug.The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email.

Brand-new “DPF1C” control panel. The DPF1C control panel has up/down buttons, a memory function with 3 memory slots and features a display showing the height. The DPF panels are screwed into place beneath the tabletop using a small bracket. All control panels are supplied complete with cable and RJ45 plug. The DPF panels are bolted into place beneath the tabletop using a small bracket.The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email. DPF1C00-012006 Control unit, black, white LED display, 3 memory positions. 1700mm cable, RJ45 plug. For installation with mounting bracketCommodity code: 85371091 Electronic Control Unit, programmable COO:

Brand-new "DPG1K" control panel. The DPG panels are operated via a tilt mechanism rather than buttons. This tilt mechanism allows for intuitive operation and can be easily installed out of sight underneath the table. All control panels are supplied with a cable and RJ45 plug. The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email. DPG1K00-000006 DPG1K, Ref 1, up/down cable 1700mm RAL9005Commodity code: 85371098 Electronic Control Unit or cable w.

Brand-new "DPAK06" control panel. The DPAK06 control panel features two buttons for UP and DOWN and has a hinge so that the panel can be folded up when not in use. All control panels are supplied with a cable and RJ45 plug. The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email. DPAK06 DPA, 2-channel, with joint, dark grey, 1580mm cable with RJ45 plug Commodity code: 85371098 Electronic Control Unit or cable with PCB COO:Remaining quantity: 0.00 pcs

Brand-new "DPF1K" control panel. The DPF1C control panel has only up and down buttons. The DPF panels are screwed into place beneath the tabletop using a small bracket. All control panels are supplied complete with cable and RJ45 plug. The DPF panels are bolted into place beneath the tabletop using a small bracket.The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email. DPF1K00-010006 Control unit, black, up/down functionCommodity code: 85371098 Electronic Control Unit or cable w.

Brand-new power cable for the Linak control box. Powercord Swiss (Swiss plug). The 3-pin cable also works with control boxes that are only 2-pin. Length: 2.8 metres Colour: Black Condition: Brand new  

Brand-new motor cable from Linak, with 6-pin connectors at both ends. Connects the control box to the motor or to the column. Linak Motor cable, 6-pin, 1 m Condition: Brand new