Go to homepage
CHF 0.00

USM Haller metal element 750x250

Skip image gallery
Glossy metal panels in orange, red, green, yellow, royal blue, black, dark blue and white, stacked diagonally. Along the edges: rows of small, round mounting holes, typical of modular furniture systems. Slightly reflective.
A black USM Haller shelf, glossy and flawless, lies diagonally against a light-coloured background. The front edge is precisely folded and features small, round fixing holes, typical of the modular system.
A white, glossy metal plate, presumably a shelf, photographed at an angle from above. The front edge is folded down and features small, evenly spaced, round holes for fixing. The surface is immaculate and slightly reflective.
Close-up of a light grey/white metal shelf with a smooth surface. Small, evenly spaced round holes can be seen along both visible edges. The edges are slightly curved downwards and clean.
A close-up view of a light grey metal plate with a slightly textured surface. Rows of small, evenly spaced holes run along both visible edges. The plate curves slightly downwards at the corner. The background is white.
A dark blue metal shelf with a glossy finish, viewed from above at an angle. Rows of small, round holes – typical of the plug-in system used in modular furniture – run along both visible edges. The background is light and neutral.
A bright orange USM Haller metal panel, photographed at a slight angle from above, on a white surface. A smooth, slightly glossy panel with small, evenly spaced round holes along both visible edges.
A close-up of a glossy, royal blue metal panel, sharply bent at one corner. Along the bend, a row of small round perforations that convey a precise, technical aesthetic. Light white background.
A glossy, bright green metal panel with a precisely folded lower edge. Small, round holes at regular intervals along the edge. The smooth surface reflects light. A white background emphasises the colour and finish.
Close-up of the corner of a bright yellow metal sheet with a rounded edge. Small, evenly spaced round holes are visible along the upper and lower folded edges. It glistens slightly against a white background.
A close-up of a matt grey USM Haller metal component, presumably a shelf panel, featuring a row of small, evenly spaced round holes along the raised edges. The surface is smooth and reflects light slightly.
Close-up of a bright red, glossy metal shelf, viewed at an angle from above. The surface is slightly reflective. Along two edges are small, evenly spaced holes for fixing. Smooth, flawless, USM Haller component.
Glossy metal panels in orange, red, green, yellow, royal blue, black, dark blue and white, stacked diagonally. Along the edges: rows of small, round mounting holes, typical of modular furniture systems. Slightly reflective.
A black USM Haller shelf, glossy and flawless, lies diagonally against a light-coloured background. The front edge is precisely folded and features small, round fixing holes, typical of the modular system.
A white, glossy metal plate, presumably a shelf, photographed at an angle from above. The front edge is folded down and features small, evenly spaced, round holes for fixing. The surface is immaculate and slightly reflective.
Close-up of a light grey/white metal shelf with a smooth surface. Small, evenly spaced round holes can be seen along both visible edges. The edges are slightly curved downwards and clean.
A close-up view of a light grey metal plate with a slightly textured surface. Rows of small, evenly spaced holes run along both visible edges. The plate curves slightly downwards at the corner. The background is white.
A dark blue metal shelf with a glossy finish, viewed from above at an angle. Rows of small, round holes – typical of the plug-in system used in modular furniture – run along both visible edges. The background is light and neutral.
A bright orange USM Haller metal panel, photographed at a slight angle from above, on a white surface. A smooth, slightly glossy panel with small, evenly spaced round holes along both visible edges.
A close-up of a glossy, royal blue metal panel, sharply bent at one corner. Along the bend, a row of small round perforations that convey a precise, technical aesthetic. Light white background.
A glossy, bright green metal panel with a precisely folded lower edge. Small, round holes at regular intervals along the edge. The smooth surface reflects light. A white background emphasises the colour and finish.
Close-up of the corner of a bright yellow metal sheet with a rounded edge. Small, evenly spaced round holes are visible along the upper and lower folded edges. It glistens slightly against a white background.
A close-up of a matt grey USM Haller metal component, presumably a shelf panel, featuring a row of small, evenly spaced round holes along the raised edges. The surface is smooth and reflects light slightly.
Close-up of a bright red, glossy metal shelf, viewed at an angle from above. The surface is slightly reflective. Along two edges are small, evenly spaced holes for fixing. Smooth, flawless, USM Haller component.

CHF 48.75

Order-based procurement: approx. 40 days, delivery time 3–10 days

Condition
USM colours
Item number: ME750x250BE.NWE

Product information "USM Haller metal element 750x250"

USM Haller metal element, Standard, 750x250.

Usually used as the base, lid and rear panel.

Suitable for the standard dimension 750x250 (distance from centre of ball to centre of ball).

Conditions:

As new = Unused

Used = Shows signs of wear (these may include small dents, scratches, paint chips, scuff marks, etc.)

Our recommendation:

For visible areas, we recommend metal components in ‘As New’ condition.
For the lower sections, the rear and the interior (shelves), we recommend metal components in ‘Used’ condition.

Availability:
Green traffic light: In stock, delivery time 3–6 days.
Red light: Item not available. Cannot be ordered.
Yellow light: The item will be ordered from the manufacturer once the order has been placed.
The delivery time depends on the manufacturer.

Condition: As good as new
Skip product gallery

Accessory Items

Two small, silver-coloured screws on a white surface. One is slightly tilted, its thread visible; the other lies flat and shows its cross-head. Both have a shiny metallic appearance.
USM Haller sheet metal screw with pan head and cross-recess 4.8x9.5

USM Haller sheet metal screw in mint condition. This screw is required to secure the horizontal metal elements (shelves and cover plates), with one at the front and one at the back, at the bottom of the metal element. Price is per piece.

CHF 0.10
This website uses cookies to ensure the best experience possible. More information...