Go to homepage
CHF 0.00

Linak Spare parts

Filter products

Black, rectangular electronic device positioned vertically on a white background. Smooth surface with a dark rectangular area at the top and a round recess below. At the bottom, a small raised rectangle with ‘0.W’ indicating energy use.
Linak control unit / control box CBD6S 4-channel

Brand-new 4-channel Linak control box / control unit. CBD6SH00040A-709 (Depending on the columns, it may be necessary to configure the software on the control box.)We offer this service at your premises for a service fee of 100.-.) Lightweight, flat control unit for Linak linear actuator systems.Plug-and-play compatible with all linear drives for tables and workstations.It has low power consumption in standby mode (< 0.1 W), is PVC-free and operates quietly.

CHF 260.00
Black, rectangular electronic device positioned vertically on a white background. Smooth surface with a dark rectangular area at the top and a round recess below. At the bottom, a small raised rectangle with ‘0.W’ indicating energy use.
Linak control unit / control box CBD6S, 2-channel, high-speed

Brand-new 2-channel Linak control box / control unit. Suitable for Linak high-speed lift columns and as a replacement for the high-power CBD4 and CBD5 control boxes. CBD6SP00020A-709 CBD6 (Depending on the columns, it may be necessary to configure the software on the control box.)We offer this service at your premises for a service fee of 100.-.) Lightweight, flat control unit for Linak linear actuator systems.Plug-and-play compatible with all linear drives for tables and workstations.It has low power consumption in standby mode (< 0.1 W), is PVC-free and operates quietly. Please note that the box states 400 watts. However, the output power is 300 watts. CBD6SP00020A-709 CBD6, 2-channel, configurable, cable routing, 0.1 W standby without 230 V mains cable, 300 W, SMPS commodity code: 85371091 Electronic Control Unit, programmable COO: DNK

CHF 200.00
Black, rectangular electronic device positioned vertically on a white background. Smooth surface with a dark rectangular area at the top and a round recess below. At the bottom, a small raised rectangle with ‘0.W’ indicating energy use.
Linak control unit / control box CBD6S 2-channel

Brand-new 2-channel Linak control box / control unit. CBD6SP00020A-009 CBD6 Lightweight, flat control unit for Linak linear actuator systems.Plug-and-play compatible with all linear drives for tables and workstations.It has low power consumption in standby mode (< 0.1 W), is PVC-free and operates quietly. Please note that the box states 300 watts. However, the output power is 200 watts.CBD6SP00020A-009 CBD6, 2-channel, configurable, cable routing, 0.1 W standby without 230 V mains cable,200W, SMPS commodity code: 85371091 Electronic Control Unit, programmable COO: DNK

CHF 150.00
Close-up of a black control panel beneath a dark desk top. The display shows ‘123’ with a green bar on the left. Below this are illuminated buttons with symbols for a bell, Bluetooth and a star for height adjustment.
Linak control panel DPG1C

Brand-new "DPG1C" control panel. The DPG panels are operated via a tilt mechanism rather than buttons. Features:- Display- Bluetooth- Memory function, with 4 memory slots- Reminder function (LED light strip indicates when to stand up or sit down again) All control panels are supplied with a cable and RJ45 plug.The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email.

CHF 64.00
Slim black control panel with rounded edges and white border. Left side has up/down arrows, then three round memory buttons with dots, an ‘S’ button and an elongated button. ‘Linak’ logo at bottom. Metal bracket and cable.
Linak Control panel DPF1C

Brand-new “DPF1C” control panel. The DPF1C control panel has up/down buttons, a memory function with 3 memory slots and features a display showing the height. The DPF panels are screwed into place beneath the tabletop using a small bracket. All control panels are supplied complete with cable and RJ45 plug. The DPF panels are bolted into place beneath the tabletop using a small bracket.The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email. DPF1C00-012006 Control unit, black, white LED display, 3 memory positions. 1700mm cable, RJ45 plug. For installation with mounting bracketCommodity code: 85371091 Electronic Control Unit, programmable COO:

CHF 64.00
A black, two-part foot pedal control panel featuring the Linak logo, comprising two separate, textured treads. A coiled black cable runs from the pedal and ends in a transparent RJ45 plug, ready for connection.
Linak control panel DPG1K

Brand-new "DPG1K" control panel. The DPG panels are operated via a tilt mechanism rather than buttons. This tilt mechanism allows for intuitive operation and can be easily installed out of sight underneath the table. All control panels are supplied with a cable and RJ45 plug. The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email. DPG1K00-000006 DPG1K, Ref 1, up/down cable 1700mm RAL9005Commodity code: 85371098 Electronic Control Unit or cable w.

CHF 39.00
A black, rounded control panel with two white triangular buttons: left for up, right for down. A black cable runs out from the top. Used to control up/down functions, e.g. height adjustment or a bed. Colour gradient from light blue to dark green-blue.
Linak Control panel DPAK06

Brand-new "DPAK06" control panel. The DPAK06 control panel features two buttons for UP and DOWN and has a hinge so that the panel can be folded up when not in use. All control panels are supplied with a cable and RJ45 plug. The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email. DPAK06 DPA, 2-channel, with joint, dark grey, 1580mm cable with RJ45 plug Commodity code: 85371098 Electronic Control Unit or cable with PCB COO:Remaining quantity: 0.00 pcs

CHF 39.00
Black oval control unit with two white arrow keys for up/down, featuring the Linak logo, mounted on a metal bracket. A black cable leads to a transparent RJ45 plug, ready for connection. Designed for precise control.
Linak Control panel DPF1K

Brand-new "DPF1K" control panel. The DPF1C control panel has only up and down buttons. The DPF panels are screwed into place beneath the tabletop using a small bracket. All control panels are supplied complete with cable and RJ45 plug. The DPF panels are bolted into place beneath the tabletop using a small bracket.The screws required for mounting are not included.If you require screws for mounting, please let us know in the comments section when placing your order or send us an email. DPF1K00-010006 Control unit, black, up/down functionCommodity code: 85371098 Electronic Control Unit or cable w.

CHF 39.00
A coiled black power cable lies on a light-coloured wooden surface. The cable has a three-pin C13 plug at one end and a Type J plug at the other end, featuring two round metal pins and a flat earth pin.
Linak cable Power

Brand-new power cable for the Linak control box. Powercord Swiss (Swiss plug). The 3-pin cable also works with control boxes that are only 2-pin. Length: 2.8 metres Colour: Black Condition: Brand new  

CHF 10.80
Black-sheathed data cable with white plugs at both ends, loosely coiled on a light beige surface. Plugs slightly angled: the top one to the right, the bottom one to the left. Tied together at the top with a black wire.
Linak Motor cable 6-pin 1 m

Brand-new motor cable from Linak, with 6-pin connectors at both ends. Connects the control box to the motor or to the column. Linak Motor cable, 6-pin, 1 m Condition: Brand new

CHF 8.00
This website uses cookies to ensure the best experience possible. More information...